|
 |
 |
|
 |
||||||||||||||||||
|
|||||||||||||||||||||
|
|||||||||||||||||||||
| IH5510 - MICROMODULETMA4 | |
 |
Features
|
| Use
& Applications Remote ON/OFF control of electrical loads Combine your Marmitek X-10 system with sensors, alarm outputs, etc. by hooking up to NC (normally closed, open=ON, close=OFF) output contacts Provides power line carrier control to existing light switches Transforms conventional switches into an X-10 transmitter Full control of all your X-10 modules by conventional switches Choose your own brand, design and colour for switches and wall sockets Place X-10 modules out of sight Ideal for installation into limited areas Use a conventional switch on a fixed location to execute Macros COMPATIBLE WITH: ACT A-10 Aritech CS 575/275/175 series X-10 power line carrier control Busch Jaeger Timac Busch Jaeger Netzbus Honeywell TotalHome Marmitek X-10 Visonic PowerMax X-10 power line carrier control X-10 X-10 PowerHouse TMA4 transmits signals for use one phase only. Use the CAT3000 repeater (Art.No. IH5610) to enable you to receive TMA4 commands on other phases. Technical information
Supply Voltage : 230VAC, +10%/-15% Frequency : 50Hz Supply current : Less than 50 mA Signal Signal input X-10 PowerLine Carrier, sensitive to 50mV Signal output X-10 PowerLine Carrier, 5Vpp @ 5 Ohms Three phase use The TMA4 transmits signals for use one phase only. Use the CAT3000 repeater (Art.No. IH5610) to enable you to receive TMA4 commands on other phases. The TMA4 receives commands from standard Marmitek X10 transmitters on different phases. Four wall switch inputs (dry contact). Five 120mm, 0,33mm² Flying leads: Switch input 1: Brown Switch input 2: Red Switch input 3: Orange Switch input 4: Yellow Switch common: Blue Programming Can be programmed by every Marmitek X-10 compatible controller. Can also be programmed by special Marmitek PRU256 programmer/X10 logger (Art.No. IH5600). Mechanical requirements Power Screw terminals (2x) L Will handle up to 2,5mm² solid copper wire N Will handle up to 2,5mm² solid copper wire Enclosure Dimensions : 46 x 46 x 16 mm Weight : 26 grams Mounting Sized for mounting of 75 x 75 x 50mm European round electrical junction box, or other limited areas Environmental parameters Operating Temperature Range : 0 to +40° C Storage Temperature Range : -20 to +70° C Humidity Range : 10 to 95% non condensing Approvals NEN-EN-IEC 60669-2-1, NEN-EN-IEC 60669-2-2, CE Specifications may change without notice to improve product performance Download data sheet - Download Manual | |